Concentrated foaming cleaner for high-grade steel and non-ferrous metals with
AUCO CHROM -GSV- removes alkaline deposits, layers of oxidation and soilings
of fat and lime on chrome, high-grade steel, iron, brass, copper or aluminium. It forms a protective
anticorrosion layer, removes iron infections and passivates the surface. AUCO CHROM - GSV – contains no hydrochloric-, nitric - or hydrofluoric acid and no chloride
AUCO CHROM -GSV- is
used for cleaning, passivation and maintenance of high-grade steel and non-ferrous metals. It is applied
onto the surface or used in immersion baths. Applied with a foam nozzle, it adheres well
to ceilings and vertical surfaces to maximize the reaction time.
For removal of oxidation layers, apply AUCO CHROM -GSV- with a foam nozzle
or spray cleaner undiluted or mixed with water in a ratio of 1 : 5.
AUCO CHROM -GSV- dries up slowly therefore you can let it take effect
overnight however without fear of corrosion.
In immersion baths - depending on requirement and immersion time - mix 1:3
to 1:10 with water. Rinse with water or apply a high pressure cleaner.
For further information please see our technical information sheet!
acids, nonionic surfactants, inhibitors, dyes and additives.
Organic ingredients are biodegradable.
MADE IN GERMANY
Hazard Symbol GHS 05
UN - Number: 3264
VOC: 0 %
Keep out of reach of children.
case of contact with the eyes: Rinse cautiously with water for several minutes.
If wearing contact lenses, please remove if possible. Continue rinsing.
contact with skin: Gently wash with plenty of soap and water.
If swallowed: Get medical advice/attention.
protective gloves / clothing / eye protection / face protection.
Causes severe skin burns and eye damage.
Avoid inhalation of spray dust!