CHROM - G

Downloads (PDF)
Safety Data Sheet Operation instructions Technical Information
Tank before cleaning with CHROM - G
After cleaning with CHROM - G
CHROM - G
The concentrated cleaner and passivator for stainless steel

Effect
AUCO CHROM - G removes greases, abrasive pastes, lime or alkaline deposits as well as oxide layers on stainless steel, and forms a protective layer against corrosion. Eliminate Fe-infections and passivates the surface. Provides a radiant shine.
AUCO CHROM - G contains no hydrochloric acid, nitric acid and no chlorides!

Use
In the metal industry, AUCO CHROM - G is used for cleaning, care and passivation of stainless steel, by spraying or immersion. In the food industry, to clean all appliances made of stainless steel.

Application
To remove oxide layers, apply AUCO CHROM - G diluted to 1:5 with sprayer. AUCO CHROM - G dries slowly. Therefore, you can use AUCO CHROM - G even overnight, without fear of corrosion. Depending on requirements and dive time, add 1:3 to 1:10 with water in immersion baths. Rinse or wipe off.

Ingredients
Anorganic acids, nonionic surfactants, inhibitors, colouring agents and auxiliaries.
Organic ingredients are biodegradable.
GHS 05 - Danger, Corrosive

Symbol:

GHS 05 - Danger, Corrossive

UN-No.: 3264

VOC: 0 %


Safety instructions
H314
Causes severe skin and eye burns

P102
Keep out of reach of children

P302 + P350
After contact with skin: wash gently with plenty of soap and water

P305 + P351 + P338
If in contact with eyes: rinse gently with water for several minutes. Remove contact lenses, if possible, and continue rinsing.

Do not inhale spray!
Store frost-free!
Share by: